Ducati MONSTER 821 Workshop Manual page 80

Check the indicated value of dowel projection (11) on brake lever (12), as shown.
The distance must be between 11.0 and 11.5 mm.
If non conforming, work on nut (10) as described.
To adjust the distance, loosen nut (10), set the right distance of dowel (11) and tighten nut (10) to a
torque of 8Nm±10%.
Check the distance again and, if non conforming, repeat the procedure.
Warning
The nut tightening procedure must be carried out while dowel is tight.
80 Ducati Manuals Resource