Yamaha FX10X Service Manual page 132

2
1
3
4
HEADLIGHT BULB REPLACEMENT
ELECTRICAL
HEADLIGHT BULB REPLACEMENT
The following procedure applies to both of the
headlight bulbs.
1. Remove:
2. Disconnect:
3. Remove:
4. Detach:
5. Remove:
6. Install:
Avoid touching the glass part of the headlight
bulb to keep it free from oil, otherwise the trans-
parency of the glass, the life of the bulb and the
luminous flux will be adversely affected. If the
headlight bulb gets soiled, thoroughly clean it
with a cloth moistened with alcohol or lacquer
thinner.
7. Attach:
8. Install:
9. Connect:
10. Install:
2-46
• Shroud
Refer to "COVERS" in CHAPTER 3.
• Headlight coupler 1
• Headlight bulb cover 2
• Headlight bulb holder 3
• Headlight bulb 4
• Headlight bulb
New
Secure the new headlight bulb with the head-
light bulb holder.
CAUTION:
• Headlight bulb holder
• Headlight bulb cover
• Headlight coupler
• Shroud
Refer to "COVERS" in CHAPTER 3.
INSP
ADJ