Yamaha FX10X Service Manual page 104

PARKING BRAKE PAD INSPECTION/
PARKING BRAKE ADJUSTMENT
a
a
PARKING BRAKE PAD INSPECTION
1. Remove:
• Right side cover
Refer to "COVERS" in CHAPTER 3.
2. Inspect:
• Parking brake pad
Wear limit a reached → Replace the parking
brake assembly.
Parking brake pad wear limit:
1.2 mm (0.05 in)
PARKING BRAKE ADJUSTMENT
1. Remove:
• Right side cover
Refer to "COVERS" in CHAPTER 3.
2. Measure:
• Parking brake cable distance
Out of specification → Adjust.
Parking brake cable distance:
43.5 ~ 46.5 mm (1.713 ~ 1.831 in)
3. Adjust:
• Parking brake cable
Adjustment steps:
• Loosen the locknut 1.
• Turn the adjusting nut 2 in or out until the spec-
ified distance a is obtained.
Turning in
Turning out
• Tighten the locknut.
Parking brake cable locknut:
6 Nm (0.6 m · kg, 4.3 ft · lb)
2-32
INSP
ADJ
Distance is increased.
Distance is decreased.