Feeder; Feeder > Adjust - Canon iR3245 Series Service Manual

Item Level
MF-ADJ-Y 2
DK-ADJ-Y 2
FRAME-X 2
FRAME-Y 2
IMG-DLY 1

17.4.2 FEEDER

17.4.2.1 FEEDER > ADJUST
iR3225 / iR3225N / iR3235 / iR3235N / iR3245 / iR3245N
COPIER > ADJUST > MISC
Description
Title Multi (manual) feeder side registration adjustment value entry
Purpose - In case of adjusting side registration of paper picked up from multi (manual) feeder
- When executing RAM clear of DC controller PCB/replacing the PCB (enter the value on service
label)
Note Note the value on service label after adjusting this mode
Settings/Adjustment range -128 to +127
Unit -
Amount of change per unit -
Value at RAM clear/at factory 0
shipment
Setting/Adjustment/Operation 1) Select the item to be highlighted to enter the setting value (switch with +/- key), and then press OK
method key.
2) Turn OFF and then ON the main power switch.
The front margin becomes bigger by 0.1mm with 1-increment in the value
Relevant Service Mode -
Supplementary info/Memo Enter the value according to the registered numeric figure for laser scan-start position with paper
picked up from multi manual feed tray
Title Side paper deck manual feeder side registration adjustment value entry
Purpose - In case of adjusting side registration of paper picked up from side paper deck
- When executing RAM clear of DC controller PCB/replacing the PCB (enter the value on service
label)
Note Note the value on service label after adjusting this mode
Settings/Adjustment range -128 to +127
Unit -
Amount of change per unit -
Value at RAM clear/at factory 0
shipment
Setting/Adjustment/Operation 1) Select the item to be highlighted to enter the setting value (switch with +/- key), and then press OK
method key.
2) Turn OFF and then ON the main power switch.
The front margin becomes bigger by 0.1mm with 1-increment in the value
Relevant Service Mode -
Supplementary info/Memo Enter the value according to the registered numeric figure for laser scan-start position with paper
picked up from side paper deck
Title Zoom fine adjustment value (in vertical scanning direction) entry
Purpose In case of adjusting magnification ration in vertical scanning direction
Note -
Settings/Adjustment range -10 to 10
Unit %
Amount of change per unit 0.1
Value at RAM clear/ 0/No
adjustment at factory
shipment
Setting/Adjustment/Operation 1) Select the item to be highlighted to enter the setting value (switch with +/- key), and then press OK
method key.
2) Turn OFF and then ON the main power switch.
Relevant Service Mode -
Supplementary info/Memo Enter the value according to the registered numeric value for extended image area in vertical scanning
direction
Title Zoom fine adjustment value (in horizontal scanning direction) entry
Purpose In case of adjusting magnification ration in horizontal scanning direction
Note -
Settings/Adjustment range -10 to 10
Unit %
Amount of change per unit 0.1
Value at RAM clear/ 0/No
adjustment at factory
shipment
Setting/Adjustment/Operation 1) Select the item to be highlighted to enter the setting value (switch with +/- key), and then press OK
method key.
2) Turn OFF and then ON the main power switch.
Relevant Service Mode -
Supplementary info/Memo Enter the value according to the registered numeric value for extended image area in horizontal
scanning direction
Title Not in use
Chapter 17
0019-9309
17-77