Control Panel Lcd Unit; Before Removing The Control Panel Lcd - Canon iR3245 Series Service Manual

Chapter 10
4) Slide the control panel unit [1] in the direction of the arrow.
5) Reverse the control panel unit [1].
6) Free the harness [3] from the wire saddle [2].
7) Remove the USB relay connector [1].
10-26
[1]
F-10-62
[1]
[3]
[2]
F-10-63
[1]
F-10-64
8) Free the claw [1] in the direction [A], and remove the control panel con-
nector cover [2] in the direction [B].
[A]
9) Remove the control panel unit.
- 1 wire saddle [1] (removing the harness)
- 1 connector [2]

10.5.5 Control Panel LCD Unit

10.5.5.1 Before Removing the Control Panel LCD

iR3225 / iR3225N / iR3235 / iR3235N / iR3245 / iR3245N
1) Remove the control panel unit. (page 10-25)Reference[Removing the
Control Panel Unit]
2) Remove the control panel lower cover. (page 10-21)Reference[Remov-
ing the Control Panel Lower Cover]
3) Remove the control panel USB PCB. (Only for the machine equipped with
the control panel USB port.) (page 10-29)Reference[Removing the
Control Panel USB PCB]
4) Remove the control panel inside frame. (page 10-20)Reference[Remov-
ing the Control Panel Inside Frame]
[2]
[B]
[1]
F-10-65
[1] [2]
F-10-66
0018-9943