Copier > Option > User (1/7) - Canon iR3245 Series Service Manual

The value which has been set takes effect after the main power switch has been turned OFF and back ON.
Item Level
ILSZ-JAM 2
IPSDEBLV 2
SP-LINK 1
17.6.1.16 COPIER > OPTION > USER (1/7)
iR3225 / iR3225N / iR3235 / iR3235N / iR3245 / iR3245N
Item Level
COPY-LIM 1
COPIER > OPTION > BODY
Description
Title Switch for detecting a jam caused by difference of paper size
Purpose of use, When used This item is used when the user asks for the item to be provided. This item is used to perform normal
printing when using the paper smaller than the one specified in the paper size dial. Select whether to
detect jams caused by difference of paper size.
Precautions for use When this item is set to '1' and when the paper larger than the one specified in the dial is used,
productivity may decrease and dirt may occur on the backside of paper.
Settings and adjustment 0: Jam caused by difference of paper size is detected. 1: Jam caused by difference of paper size is not
ranges detected.
When this mode is set to '1' and when the paper smaller than the one specified in the dial is used, jams
are not detected.
Unit -
Value at time of shipment 0
from factory/Value
established when RAM is
cleared
Setting, adjustment and 1) Select the item to highlight it, input the setting, and press the OK key.
operation procedures 2) Set the main power switch to OFF and back to ON.
Related service modes -
Additional description and Usually, when the paper size specified in the dial of the paper cassette differs from the size of the paper
notes actually used, it is judged as a jam caused by difference of paper size.
Not used
Title 1W sleep mode setting
Purpose of use, When used This is a switch used to place the machine on standby for 10base-T as default setting in order to realize
1W power in sleep mode.
When used This item is used when switching the machine operation to sleep mode after Negotiation in the same
manner as the existing machine.
Precautions for use -
Settings and adjustment 0: Operation is forcibly switched to sleep mode on 10base-T.
ranges 1: Operation is switched to sleep mode after Negotiation.
Unit -
Value at time of shipment 0
from factory/Value
established when RAM is
cleared
Setting, adjustment and 1) Select the item to highlight it, input the setting, and press the OK key.
operation procedures 2) Set the main power switch to OFF and back to ON.
Related service modes -
Additional description and -
notes
COPIER > OPTION > USER
Description
Title Change in upper limit setting for number of copies
Purpose of use, When used Change the upper limit setting for the number of copies.
Precautions for use -
Settings and adjustment 1 to 9999
ranges
Unit Copies
Value at time of shipment 9999
from factory/Value
established when RAM is
cleared
Setting, adjustment and 1) Select the item to highlight it, input the setting, and press the OK key.
operation procedures 2) Set the main power switch to OFF and back to ON.
Related service modes -
Additional description and -
notes
T-17-65
Chapter 17
0019-9615
17-133