Canon iR3245 Series Service Manual page 714

Chapter 18
13) Click [Next].
The message prompts to shutdown will be displayed on the control panel.
14) Press reset key.
The power of the machine turns off.
15) Click [Next].
16) In the case that the G3FAX board is installed, click [OK].
The system software "G3FAX" is not downloaded in a batch, and needs to be done separately. For details, see "Downloading the System Software (Single)".
17) Remove the twisted pair cross cable from the machine.
18) Turn on the main power switch of the machine.
19) Check the system software version in service mode.
18-20
Service Support Tool DLM10 (Ver. X.XX E) Assist Mode
172.16.1.10
PC Information Control
Available firmware version
Downloading firmware was
completed.
Shutdown sequence is started to
execute the writing process.
USenXXXX(US) Power OFF Copier by following
USenXXXX(US)
the display and wait for 5
USenXXXX(USS)
seconds. Then, power ON.
USenXXXX(US)
Confirm Download
Same Ver.: Skip/Downgrade: Confirm
Same Ver. and Downgrade: Confirm
Return to Main Menu
Overwrite all
F-18-29
Service Support Tool DLM10 (Ver. X.XX E) Assist Mode
172.16.1.10
PC Information Control
Available firmware version
Power ON Copier and wait for the
message("Please hit Reset Key
to start shutdown.") on the
display, then press Reset key.
Copier is turned OFF
USenXXXX(US) automatically.
USenXXXX(US)
USenXXXX(USS)
When Copier power is turned
USenXXXX(US)
OFF, click [Next] button.
Confirm Download
Same Ver.: Skip/Downgrade: Confirm
Same Ver. and Downgrade: Confirm
Return to Main Menu
Overwrite all
F-18-30
Service Support Tool DLM10 (Ver. X.XX E) Assist Mode
172.16.1.10
PC Information Control
Available firmware version
Select Single mode for
downoading multiple lines G3Fax
board firmware after Assist mode
is ended.
Without removing network cable,
USenXXXX(US) power ON Copier by holding down
USenXXXX(US)
1 and 7 keys and enter download
USenXXXX(USS)
mode of service mode.
USenXXXX(US)
Confirm Download
Same Ver.: Skip/Downgrade: Confirm
Same Ver. and Downgrade: Confirm
Return to Main Menu
Overwrite all
F-18-31
Series : iR3245
DL Mode : NORMAL
172.16.1.100
MFP Information
MEDIA
XXenXXXX
XX jaXXXX
RCON
XXxxXXXX
RUI
XXenXXXX
SDICT
XX jaXXXX
Next Next
SYSTEM
Active
USenXXXXn
Backup
Cancel
USenXXXXn
TTS
XXenXXXX
XX jaXXXX
Series : iR3245
DL Mode : NORMAL
172.16.1.100
MFP Information
MEDIA
XXenXXXX
XX jaXXXX
RCON
XXxxXXXX
RUI
XXenXXXX
SDICT
XX jaXXXX
Next Next
SYSTEM
Active
USenXXXXn
Backup
Cancel
USenXXXXn
TTS
XXenXXXX
XX jaXXXX
Series : iR3245
DL Mode : NORMAL
172.16.1.100
MFP Information
MEDIA
XXenXXXX
XX jaXXXX
RCON
XXxxXXXX
RUI
XXenXXXX
SDICT
XX jaXXXX
O K
SYSTEM
Active
USenXXXXn
Backup
Cancel
USenXXXXn
TTS
XXenXXXX
XX jaXXXX