Making Connections (Usb Device In Use) - Canon iR3245 Series Service Manual

18.2.4 Making Connections (USB device in use)

iR3225 / iR3225N / iR3235 / iR3235N / iR3245 / iR3245N
The SST cannot be run while the USB device is in use. (The machine will not communicate with the SST when it detects the presence of a USB device.)
Preparatory Work
Requirements: USB device to which the system software has been copied.
Procedure
1) Check to see that the Execute/Memory lamp on the control panel is off, and turn off the power of the machine as described below.
1-1) Hold down the power switch on the control panel for 3 sec or more.
1-2) Shut down the machine by following the instruction on the control panel.
The main power switch will turn off automatically.
2) Connect the USB device [2] to the USB port [1].
[1]
[2]
F-18-15
[1]
F-18-16
Chapter 18
[2]
0019-6417
18-11