Installing The Memory; Checking The Contents; Turning Off The Power Of The Host Machine; Installation Procedure - Canon iR3245 Series Service Manual

Chapter 2
20) Connect one of the AC cable (for the host machine outlet) to the power
cord mount of the heater, and the other to the cassette pedestal of the host
machine.
21) Put the plug cover [1] to the AC cable connector, and fix it with the screw
[2].
22) Affix the power label [3] to the rear cover of the paper deck as shown in
the figure below.
[3]
Be sure to tell the users not to place any things within the shaded area for
not disturbing opening/closing the paper deck when connecting the power
plug of the heater.
[1]
[2]
[1] Host machine
[2] Front side
[3] Paper deck

2.12 Installing the Memory

2.12.1 Checking the Contents

iR3225 / iR3225N / iR3235 / iR3235N / iR3245 / iR3245N
<Additional Memory Type A (512MB)>
[1]
[1] Expansion memory

2.12.2 Turning OFF the Power of the Host Machine

iR3225 / iR3225N / iR3235 / iR3235N / iR3245 / iR3245N
Be sure to refer to "Points to Note When Turning OFF the Main Power" in
installation of the host machine.

2.12.3 Installation Procedure

iR3225 / iR3225N / iR3235 / iR3235N / iR3245 / iR3245N
1. Installation Procedure
1) Remove the upper rear cover [1].
- 9 screws [2]
2-38
[1] [2]
F-2-158
[3]
F-2-159
1pc.
[2]
2) Release the claw of the DIMM stopper [2] on the main controller PCB [1]
in the direction of the arrow, and then install the expansion memory [3].
[1]
3) Install the upper rear cover.
4) Insert the power plug into the power outlet.
5) Turn on the main power switch.
2. Checking Memory Expansion
Service mode > COPIER > DISPLAY > ACC-STS > IA-RAM
After expanding the expansion memory, check to see that the memory capac-
ity has increased.
0018-9866
2.13 Installing the Memory (System upgrade
memory)
2.13.1 Checking the Contents
iR3225 / iR3225N / iR3235 / iR3235N / iR3245 / iR3245N
<System Upgrade RAM-A1>
0019-4425
[1] Expansion RAM
2.13.2 Turning OFF the Power of the Host Machine
iR3225 / iR3225N / iR3235 / iR3235N / iR3245 / iR3245N
0018-9892
Be sure to refer to "Points to Note When Turning OFF the Main Power" in
installation of the host machine.
[1]
F-2-160
[2] [3]
F-2-161
[1]
F-2-162
[2]
0019-5141
1pc.
0019-5142