Canon iR3245 Series Service Manual page 641

Item Level Description
TRY-STP 2 Title
Purpose of use, When used
Precautions for use
Settings and adjustment
ranges
Unit
Value at time of shipment
from factory/Value
established when RAM is
cleared
Setting, adjustment and
operation procedures
Related service modes
Additional description and
notes
MF-LG-ST 2 Title
Purpose of use, When used
Precautions for use
Settings and adjustment
ranges
Unit
Value at time of shipment
from factory/Value
established when RAM is
cleared
Setting, adjustment and
operation procedures
Related service modes
Additional description and
notes
CNT-DISP 2 Title
Purpose of use, When used
Precautions for use
Settings and adjustment
ranges
Unit
Value at time of shipment
from factory/Value
established when RAM is
cleared
Setting, adjustment and
operation procedures
Related service modes
Additional description and
notes
PH-D-SEL 2 Title
Purpose of use, When used
Precautions for use
Settings and adjustment
ranges
Unit
Value at time of shipment
from factory/Value
established when RAM is
cleared
Setting, adjustment and
operation procedures
Related service modes
Additional description and
notes
COPIER > OPTION > USER
Setting of printing suspension mode when finisher tray is full
Set whether to suspend printing when a full tray has been detected in the finisher.
-
0: Normal (printing is suspended when a full finisher tray is detected)
1: Printing is suspended only during height detection.
-
0
1) Select the item to highlight it, input the setting, and press the OK key.
2) Set the main power switch to OFF and back to ON.
-
-
Setting of long document button display
Display the "long document" button on the application screen accessed from the copy screen.
-
0: The button is not displayed.
1: The button is displayed.
-
0
1) Select the item to highlight it, input the setting, and press the OK key.
2) Set the main power switch to OFF and back to ON.
-
Sheets/documents up to 630mm long can be supported. However, the bypass tray unit needs to be used
for sheets, and the ADF needs to be used for documents.
Setting as to whether to display the serial number on the counter status check screen
Set whether to display the serial number on the counter status check screen.
-
0: Serial number is displayed.
1: Serial number is not displayed.
-
0
1) Select the item to highlight it, input the setting, and press the OK key.
2) Set the main power switch to OFF and back to ON.
-
-
Switching of the number of lines in printing paper photo mode
-
-
0: 141 lines, 1: 134 lines
-
-
-
-
-
Chapter 17
17-143