Downloading Procedure (Assist Mode) - Canon iR3245 Series Service Manual

Chapter 18

18.4.1.2 Downloading Procedure (Assist mode)

iR3225 / iR3225N / iR3235 / iR3235N / iR3245 / iR3245N
Do Not Turn Off the Power During Download/Write Operation
Do not turn OFF the power while the system software is being downloaded or written. The machine may fail to start when the power is turned ON.
If the power cannot be turned ON, try to start it in safe mode (press 2 + 8 simultaneously).
If the machine starts in safe mode, download the system software again. If not, replace HDD and download the system software.
1) Start the machine in safe mode. (While pressing 2 + 8, turn ON the main power switch.)
2) Start up the SST.
3) Click [Start Assist Mode].
If starting the machine in Assist mode, this operation is not needed.
If the newer combination of system software than the machine is registered in SST, it will be selected (highlighted).
MEMO:
If the older combination of system software than that of device is only registered, nothing is selected. The system software in intended version can be downloaded by
selecting the specific combination manually.
4) Click [Start].
When download is complete, the machine's power turns off automatically.
5) After 10 sec from the power off of the machine, turn on the main power switch.
18-18
Service Support Tool DLM0 (Ver. X.XX E)
Target Selection CONTROL
Select the target.
Click a button to execute.
MFP
CONNECT
MFP
R e g i s t e r F i r m wa r e
USB
D e l e t e F i r m wa r e
D e l e t e B a ck u p D a t a
S y s t e m M a n a g e m e n t
USB
c:
STAR
S t a r t A s s i s t M o d e
F-18-24
Service Support Tool DLM10 (Ver. X.XX E) Assist Mode
172.16.1.10
PC Information Control
Available firmware version
Later version firmware was found
for connected copier.
Select firmware version.
To start upgrading, click [Start]
button.
USenXXXX(US)
USenXXXX(US)
USenXXXX(USS)
USenXXXX(US)
Confirm Download
Same Ver.: Skip/Downgrade: Confirm
Same Ver. and Downgrade: Confirm
Return to Main Menu
Overwrite all
F-18-25
Model List
Select a model to connect
ART
EXIT
Series : iR3245
DL Mode : SAFE
172.16.1.100
MFP Information
Start Start
Cancel
0020-3085