[1]
3) Removing the screw [1] and remove the manual feeder pad up/down so-
lenoid [2].
[2]
Points to Note When Installing the Manual Feeder Pad Up/Down
Solenoid
Be sure to hook the arm [1] of the manual feeder pad up/down solenoid on
the protrusion [2] of the gear.
[2]
8.8.16.3 Removing the Manual Feeder Pad Up/Down
Solenoid (iR 3225)
iR3225 / iR3225N
[2]
[1]
F-8-72
[1]
1) Remove the plate [5].
- 1 edge saddle [1] (removing the harness)
- 1 connector [2]
- 2 screws [3]
- 1 spring [4]
Points to Note When Installing the Plate
- Be sure to hook the spring [1] on the plate [2].
0019-8442
- Be sure to hook the spring [1] of the flapper on the end [2] of the unit.
[3]
[1]
[2]
[3]
[4]
[5]
F-8-73
[1]
Chapter 8
[2]
8-39