Chapter 9
9) Turn the pressure plate [1] in the direction of the arrow to release.
10) While pushing down the release lever (front) [1] with your finger, pull
out the heater contact [2].
11) While pushing down the release lever (rear) [1] with your finger, pull out
the heater contact [2].
12) Remove the screw [1] to free the AC harness [2].
13) Free the AC harness [1] from the edge saddle [2].
9-12
F-9-25
F-9-26
F-9-27
F-9-28
F-9-29
14) Disconnect the relay connector [1] of the signal cable from the connector
holder [2].
[1]
15) Disconnect the connector [2] from the relay connector [1].
16) Remove the fixing film unit [1].
9.5.5 Internal Delivery Sensor
9.5.5.1 Before Removing the Internal Delivery Sensor
iR3225 / iR3225N / iR3235 / iR3235N / iR3245 / iR3245N
1) Remove the rear right cover. (page 10-16)Reference[Removing the
Rear Right Cover]
2) Release the right cover. (page 10-36)Reference[Releasing the Right
Cover]
3) Remove the fixing unit. (page 9-8)Reference[Removing the Fixing
Unit]
4) Remove the fixing film unit. (page 9-10)Reference[Removing the Fix-
ing Film Unit]
9.5.5.2 Removing the Internal Delivery Sensor
iR3225 / iR3225N / iR3235 / iR3235N / iR3245 / iR3245N
[2]
F-9-30
F-9-31
F-9-32
0018-9934
0018-9935