Setting Up The Universal Cassette - Canon iR3245 Series Service Manual

Inch-configuration
MEMO:
- SW4 is used to detect the state of the AB/Inch-configuration switch.
- The machine will assume the absence of a cassette if it detects a combination not found in the table. At this time, it does not move up the cassette lifter.
- Since the paper size is not identified, there will be no indication of a paper size on the control panel; when the cassette in question is selected, the machine will
indicate a message prompting the supply of paper.
- If an envelope size is detected, an envelope cassette must be fitted.

8.4.4 Setting Up the Universal Cassette

iR3225 / iR3225N / iR3235 / iR3235N / iR3245 / iR3245N
The following are default sizes the machine will assume when U1 through U4 are detected:
The following is a list of sizes that may be assigned in addition to default sizes in service mode:
Size SW0 SW1
(no cassette) OFF OFF
STMTR ON OFF
LTR ON ON
LTRR OFF ON
LGL OFF ON
11x17 ON ON
EXEC OFF OFF
U3 OFF ON
U4 OFF ON
Envelope ON OFF
U1:
U2:
U3:
U4:
FLSC
OFI
E-OFI
B-OFI
A-OFI
M-OFI
FOLI
A-FLS
G-LTR
G-LGL
A-LTR(LTR)
A-LTRR(LTRR)
T-8-8
SW2 SW3 SW4
OFF OFF OFF
ON ON ON
ON ON ON
ON ON ON
OFF ON ON
OFF ON ON
OFF ON ON
OFF OFF ON
ON OFF ON
ON OFF ON/OFF
G-LTR
FLSC
G-LGL
A-LTR
T-8-9
Size
Chapter 8
0018-9753
8-19