If you want to execute a machine operation using a service mode item, be sure to disconnect all cables from an external controller or a network before starting service

mode. Particularly, if you are using a FUNCTION (operation/inspection) mode item, the arrival of a print job from an external source can cause the machine to

malfunction, leading to damage.

1) Press the asterisk key "

" on the control panel.

2) Press the 2 and 8 keys of the keypad at the same time.

3) Press the asterisk key "

" on the control panel.

In response to the foregoing key operations, the machine will bring up the following Initial screen:

Copier's service mode

ADF's service mode

Sorter's or finisher's service mode

Optional board's service mode

17.1.3 Ending Service Mode

iR3225 / iR3225N / iR3235 / iR3235N / iR3245 / iR3245N

A press on the Reset key will bring back the Service Mode Initial screen.

Another press on the Reset key will end service mode, and bring back the User screen (standard screen).

If you used service mode (ADJUST, FUNCTION, OPTION), be sure to turn off and then on the main power switch after ending service mode.

17.1.4 Back-Up

iR3225 / iR3225N / iR3235 / iR3235N / iR3245 / iR3245N

At time of shipment from the factory, all machines are adjusted individually, and adjustment values are recorded in their respective service labels.

If you have replaced the reader controller PCB or the DC controller PCB, or if you have initialized the RAM, the adjustment values (for ADJUST and OPTION)

will return to their default settings. If there has been any change in a service mode item, be sure to update its setting indicated on the service label. As necessary,

make use of the space in the service label (as when recording an item not found on the label).

- Service Label for the Reader Controller PCB (behind the rear cover [1] of the reader unit)

- Service Label [2] for the Main Controller PCB/DC controller PCB (behind the front cover unit of the printer unit)

17-2

only when installed.

only if installed; the absence

of a mode for a sorter prevents

the indication of the notation.

only if installed

[1]

COPIER

FEEDER