Copier > Display > Sensor; Copier > Display > Alarm; Copier > Display > Envrnt - Canon iR3245 Series Service Manual

Chapter 17
COPIER > DISPLAY > CCD
Item Level
GAIN-E 2
17.2.1.9 COPIER > DISPLAY > SENSOR
iR3225 / iR3225N / iR3235 / iR3235N / iR3245 / iR3245N
Item Level
DOC-SZ 2
17.2.1.10 COPIER > DISPLAY > ALARM-2
iR3225 / iR3225N / iR3235 / iR3235N / iR3245 / iR3245N
<No.> Alarm sequential number: 1 to 50 (The oldest alarm has the greatest number.)
<DATE> Alarm occurrence date
<TIME1> Alarm occurrence time
<TIME2> Alarm reset time
<CODE> Alarm location code and alarm code
<DTL> Alarm detail code
<CNTR> Total counter value at alarm occurrence
17.2.1.11 COPIER > DISPLAY > ENVRNT
iR3225 / iR3225N / iR3235 / iR3235N / iR3245 / iR3245N
Environmental log display
Changes of [In-machine temperature (deg C)/humidity (%) / Fixing roller surface (center) temperature (deg C) are displayed as log data.
Remarks: The data acquisition cycle can be set at COPIER>OPTION>BODY>ENVP-INT in Service Mode.
17-28
Description
Title Adjustment value of gain level in even bit on CCD
Purpose To judge if this adjustment value is correct when an image fault attributed to CCD occurs.
Note -
Displays, settings and -
adjustment ranges
Unit -
Appropriate guideline 0 to 255
Related service modes -
Additional description and -
notes
COPIER > DISPLAY > SENSOR
Description
Title Display of the original size identified by original size sensor
Purpose -
Situation -
Note -
Displays, settings and -
adjustment ranges
Unit -
Appropriate guideline -
Related service modes -
Additional description and -
notes
T-17-7
F-17-11
0019-9277
0019-9859
0019-9860