Installing The Voice Guidance Kit; Notice At Installation; Checking The Contents; Turning Off The Power Of The Host Machine - Canon iR3245 Series Service Manual

Chapter 2
[2]
[1]
3) Install the upper rear cover.
4) Insert the power plug into the outlet.
5) Turn ON the main power switch.

2.15 Installing the Voice Guidance Kit

2.15.1 Notice At Installation

iR3225 / iR3225N / iR3235 / iR3235N / iR3245 / iR3245N
See 'Combination Table of Accessories' when installing this equipment.
- When installing this equipment with the Expansion Bus, be sure to install
this equipment first.
- If the Expansion Bus has been installed, be sure to remove it and then
install this equipment.

2.15.2 Checking the Contents

iR3225 / iR3225N / iR3235 / iR3235N / iR3245 / iR3245N
<Voice Guidance Kit-D1>
[1]
[3]
[8]
[7]
[6]
[1] Speaker unit (upper)
[2] Speaker unit (lower)
[3] Cable (1300 mm)
[4] Cable guide
(4 or 5 pc used for this equipment)
2-40
[3]
[3]
F-2-167
[2]
[4] [5]
[9] [10] [11]
F-2-168
1pc
1pc
1pc
7pc
[5] Voice board unit
[6] Card spacer
[7] Screw (TP; M3X6)
[8] Screw (binding; M4X6)
[9] Screw (binding; M3X16)
[10] Screw (binding; M4X16)
[11] Ferrite core
<CDs/guides>
- Voice guidance guide
- Voice guidance guide CD
- FCC/IC Sheet

2.15.3 Turning Off the Power of the Host Machine

iR3225 / iR3225N / iR3235 / iR3235N / iR3245 / iR3245N
Be sure to refer to "Points to Note When Turning OFF the Main Power" in
installation of the host machine.

2.15.4 Installation Procedure

iR3225 / iR3225N / iR3235 / iR3235N / iR3245 / iR3245N
1) Remove the upper rear cover [1].
- 9 screws [2]
0019-9919
[2]
2) Remove the face plate [1]. (Do not use the removed face plate.)
0019-9920
- 2 screws [2]
3) Install the 2 card spacers [1] on the main controller PCB.
[1]
F-2-169
[1]
F-2-170
1pc
2pc
1pc
1pc
1pc
1pc
2pc
0019-9921
0019-9922
[2]
[2]