Manual Feeder Pad Up/Down Solenoid; Before Removing The Manual Feeder Pad Up/Down Solenoid; Removing The Manual Feeder Pad Up/Down Solenoid (Ir 3425/3235/3230) - Canon iR3245 Series Service Manual

2) Remove the manual feed pickup roller [3] together with the shaft.
- 1 bushing [2]
3) Remove the manual feed pickup roller [3] together with the shaft.
- 1 plastic E-ring [4]
Do not drop the parallel pin when removing the manual feed pickup roller.

8.8.16 Manual Feeder Pad Up/Down Solenoid

8.8.16.1 Before Removing the Manual Feeder Pad Up/
Down Solenoid
iR3225 / iR3225N / iR3235 / iR3235N / iR3245 / iR3245N
1) Remove the upper rear cover. (page 10-17)Reference[Removing the
Upper Rear Cover]
2) Remove the lower rear cover. (page 10-17)Reference[Removing the
Lower Rear Cover]
3) Remove the main drive unit. (page 10-21)Reference[Removing the
Main Drive Unit (iR 3245/3235/3230)] (page 10-22)Reference[Re-
moving the Main Drive Unit (iR 3225)]
8.8.16.2 Removing the Manual Feeder Pad Up/Down
Solenoid (iR 3425/3235/3230)
iR3225 / iR3225N / iR3235 / iR3235N / iR3245 / iR3245N
F-8-68
1) Remove the main motor mounting plate [5] (with the main motor).
- 1 edge saddle [1] (removing the harness)
- 4 screws [2]
- 1 spring [3]
- 2 timing belt [4]
[3]
[2]
[2]
0019-8304
0019-8305
[4]
Points to Note During the Work
Be sure that the 2 timing belts [2] are fitted to the shaft [1] of the main motor
as shown.
Chapter 8
[5]
[2]
[1]
[2]
F-8-69
[4]
F-8-70
8-37