Canon iR3245 Series Service Manual page 643

Item Level Description
HDCR-DSP 2 Title
Purpose of use, When used
Precautions for use
Settings and adjustment
ranges
Unit
Value at time of shipment
from factory/Value
established when RAM is
cleared
Setting, adjustment and
operation procedures
Related service modes
Additional description and
notes
JOB-INVL 2 Title
Purpose of use, When used
Precautions for use
Settings and adjustment
ranges
Unit
Value at time of shipment
from factory/Value
established when RAM is
cleared
Setting, adjustment and
operation procedures
Related service modes
Additional description and
notes
PR-PSESW 1 Title
Purpose of use, When used
Precautions for use
Settings and adjustment
ranges
Unit
Value at time of shipment
from factory/Value
established when RAM is
cleared
Setting, adjustment and
operation procedures
Related service modes
Additional description and
notes
IDPRN-SW 1 Title
Purpose of use, When used
Precautions for use
Settings and adjustment
ranges
Unit
Value at time of shipment
from factory/Value
established when RAM is
cleared
Setting, adjustment and
operation procedures
Related service modes
Additional description and
notes
COPIER > OPTION > USER
Selection of data clearing method in hard drive complete deletion mode
Select the data clearing method in the hard drive complete deletion mode.
-
1: Hard drive data is cleared using all null data in one session.
2: Hard drive data is cleared using random data in one session.
3: Hard drive data is cleared using random data in 3 sessions.
When the setting value is increased, the security level is improved, but the time required for clearing
the hard drive data becomes longer.
-
1
1) Select the item to highlight it, input the setting, and press the OK key.
2) Set the main power switch to OFF and back to ON.
-
Hard drive complete deletion function:
This function writes null data or random data over the file data areas at the time when the files are
deleted logically (when the control information data is deleted) to clear the hard drive.
Setting of job intervals during interrupts
With interrupt copying, it is difficult to differentiate between the sheets of one job from the sheets of
another because the sheets of one job continue on from those of the previous job. As a remedial
measure, gaps between the sheets are left after the last sheet of the previous job has been delivered.
-
0: Standard setting (sheets of one job continue on from the sheets of the previous job)
1: Output of the following job is started after the last sheet of the interrupt copying job has been
delivered.
2: The output of the job is started only after the last sheet of the previous job has been delivered for all
jobs.
-
0
1) Select the item to highlight it, input the setting, and press the OK key.
2) Set the main power switch to OFF and back to ON.
-
-
Selection of print pause function switch display
This item is used when the user asks for the item to be provided; when quickly suspending a print job
being executed or reserved. Display the "print pause" button on the system status/suspension screen.
-
0: The "print pause" button is not displayed.
1: The "print pause" button is displayed.
-
0
1) Select the item to highlight it, input the setting, and press the OK key.
2) Set the main power switch to OFF and back to ON.
-
-
Switching of job types counted up by department control counters
Switch the type of jobs which are to be counted up by the department control counters.
-
0:
For countup by PRINT category->BoxPrint, ReportPrint, SendLocalPrint, PDLPrint
For countup by COPY category->COPY
1:
For countup by PRINT category->ReportPrint, SendLocalPrint, PDLPrint
For countup by COPY category->COPY, BoxPrint
-
0
1) Select the item to highlight it, input the setting, and press the OK key.
2) Set the main power switch to OFF and back to ON.
-
-
Chapter 17
17-145