Specifying Feeder Auto Start - Canon 1100 Reference Manual

9
Cut the output colour palette sheet along the dotted lines, then replace the
old colour palette sheet with the new one.
10
Press [OK] → [Done].

Specifying Feeder Auto Start

This function allows you to specify whether or not an original placed in the feeder's (option)
single sheet document feeder is automatically pulled into the copier and copied.
IMPORTANT
•
Feeder Auto Start can be specified only if the feeder (option) is attached.
NOTE
•
The default setting is "On".
1
Display the required screen as follows:
(Additional Functions) → [Custom Settings] → [
Press
] → [Feeder Auto Start]
] or [
Customising the Copier's Global Settings
2
2-23