Points To Note At Time Of Downloading - Canon iR3245 Series Service Manual

Chapter 18
Download the system software
System software is saved in the temporary storage area on HDD after downloaded with SST (version 4.02 or later).
Restart the machine after download so that it will be written to the system area, Boot area and the flash ROM.
Turn OFF/ON the main power switch and the machine starts with the new version system software.
3) Writing takes place.
<<<<< download shell >>>>> <<<<< do wnload shell >>>>>
[ SYSTEM JPja-m ] - - - - [ SYSTEM JPja-m ] - - - -
[ SYSTEM ZZ ] - - - - - - - [ SYSTEM ZZ ] - - - - - - -
[ SYSTEM JPja-w ] - - - - [ SYSTEM JPja-w ] - - - -
[ SYSTEM ZZ ] - - - - - - - [ SYSTEM ZZ ] - - - - - - -
[ FONT F ] - - - - - - - - - - [ FONT F ] - - - - - - - - - -
[ FONT G ] - - - - - - - - - - [ FONT G ] - - - - - - - - - -
+++ Switch OFF the power then ON. +++ Switch OFF the po
There are 2 ways to download the system software.
- Batch download
To download various system software collectively
The system software (combination) that will be downloaded with batch download is stated in the batch download information file ("ALL") which is stored
on the system CD. Register the system software in SST to enable the batch download function.
- Individual download
To download the selected system software individually

18.1.3 Points to Note at Time of Downloading

iR3225 / iR3225N / iR3235 / iR3235N / iR3245 / iR3245N
Do Not Turn Off the Power During Download/Write Operation
Do not turn OFF the power while the system software is being downloaded or written. The machine may fail to start when the power is turned ON.
If the power cannot be turned ON, try to start it in safe mode (press 2 + 8 simultaneously).
If the machine starts in safe mode, download the system software again. If not, replace HDD and download the system software.
Points to Note About Upgrading the DC Controller/Reader Controller
It is recommended to download DCON/RCON in normal mode.
DCON/RCON may be downloaded in either normal mode or safe mode. However, if done in safe mode, the version information of DCON/RCDON will not be
obtained. In this case, DCON/RCON on HDD is always overwritten by DCON/RCON on SST regardless of versions; thus it may be downgraded.
18-4
1)
Status of
reception(sample)
- - - Do - - - Download Mode - - - wnload Mode - - -
[ iR2270i-JPjaxxxx-MN.dsh ] - - - - xx% [ iR2270i-JPjaxxxx-MN.dsh ] - - - - xx%
System
Software
HDD
System
Software
Temporary
Upgrading complete Upg ading complete
Upgrading complete Upg ading complete
Upgrading complete Upg ading complete storage area
Upg Upgrading complete ading complete
Upg Upgrading complete ading complete
Upgrading complete Upg ading complete
er then ON. +++ +++
System area
Boot area
FLASH
ROM
The system software is downloaded.
- - - Do - - - Download Mode - - -
[ iR2270i-JPjaxxxx-MN.dsh ] - - - - - - - - - - [ iR2270i-JPjaxxxx-MN.dsh ] - - - - - - - - - -
[ iR2270iM-JPjaxxxx-1F77-MN.PRG ] - - - - [ iR2270iM-JPjaxxxx-1F77-MN.PRG ] - - - -
[ iR2270iM-ZZjaxxxx-49AD.PRG ] - - - - - - - [ iR2270iM-ZZjaxxxx-49AD
[ iR2270iW-JPjaxxxx-5C16-MN.PRG ] - - - - [ iR2270iW
[ iR2270iW-ZZjaxxxx-A825.PRG ] - - - - - - - [ iR2270iW
[ iR2270iF-JPjaxxxx-DE96-ICC.PRG ] - - - - [ iR2270iF-JPjaxxxx-DE96-ICC
[ iR2270iW-ZZjaxxxx-A825.PRG ] - - - - - - - [ iR2270iW
[ iR2270iG-JPjaxxxx-EC30-ICC.PRG ] - - - - [ iR2270iG-JPjaxxxx-EC30-ICC
Temporary
storage area
2) The main power switch is turned off and then on.
The main power switch is turned off and then on.
4)
5) The machine starts up using the new version.
F-18-3
wnload Mode - - -
Complete Complete
Complete Complete
.PRG ] - - - - - - - Complete Complete
-JPjaxxxx-5C16-MN.PRG ] - - - - Complete Complete
-ZZjaxxxx-A825.PRG ] - - - - - - - Complete Complete
.PRG ] - - - - Complete Complete
-ZZjaxxxx-A825.PRG ] - - - - - - - Complete Complete
.PRG ] - - - - Complete Complete
HDD
System
Software
0019-6414