Canon iR3245 Series Service Manual page 115

[1]
B: In the case that the card reader has been installed on the host
machine
[1]
14) Insert the other side of cable [1] into the terminal [2] of the voice opera-
tion board.
[2]
15) Remove the 3 face seals [1] at the rear cover. (Do not use the removed
face seals.)
[2]
[3]
F-2-200
[2]
[3]
F-2-201
[1]
F-2-202
[1]
16) Install the wire saddles [1] to the 3 locations that the face seals have been
removed.
[1]
17) Fix the cable [1] with the 3 wire saddles [2] while preventing excess
slack on the cable as shown in the figure.
[2] [1]
18) Make a turn of the ferrite core [2] around the foot switch cable [1] of the
user and install it, and then insert it into the terminal [3] of the voice op-
eration board.
Be sure to install the ferrite core as close as possible to the connection of the cable.
Chapter 2
F-2-203
F-2-204
[2]
F-2-205
2-47