Copier > Option > User (4/7) - Canon iR3245 Series Service Manual

Item Level
BCNT-AST 1
PRJOB-CP 2
17.6.1.19 COPIER > OPTION > USER (4/7)
iR3225 / iR3225N / iR3235 / iR3235N / iR3245 / iR3245N
Item Level
DOC-REM 1
DPT-ID-7 2
COPIER > OPTION > USER
Description
Title Selection of job type when BoxPrint is counted by NE controller
Purpose of use, When used Select the job type to be counted when BoxPrint is counted by the NE controller (ASSIST).
Precautions for use -
Settings and adjustment 0: Jobs are counted as PDL jobs.
ranges 1: Jobs are counter as copy jobs.
Unit -
Value at time of shipment 0
from factory/Value
established when RAM is
cleared
Setting, adjustment and 1) Select the item to highlight it, input the setting, and press the OK key.
operation procedures 2) Set the main power switch to OFF and back to ON.
Related service modes -
Additional description and -
notes
Title Setting as to whether to send count pulses during receive print and ReportPrint
Purpose of use, When used Set whether to send count pulse notices for each page during receive print or ReportPrint to the charge
control unit (a coin vender or a control card made by another manufacturer) when such a unit is being
used.
Precautions for use -
Settings and adjustment 0: Count pulses are not sent.
ranges 1: Count pulses are sent.
Unit -
Value at time of shipment 0
from factory/Value
established when RAM is
cleared
Setting, adjustment and 1) Select the item to highlight it, input the setting, and press the OK key.
operation procedures 2) Set the main power switch to OFF and back to ON.
Related service modes -
Additional description and -
notes
COPIER > OPTION > USER
Description
Title ON/OFF setting for document removal message display
Purpose of use, When used Set ON/OFF for displaying the document removal message.
Precautions for use -
Settings and adjustment 0: The document removal message is not displayed.
ranges 1: The document removal message is displayed.
Unit -
Value at time of shipment 0
from factory/Value
established when RAM is
cleared
Setting, adjustment and -
operation procedures
Related service modes -
Additional description and -
notes
Title Selection of 7-digit password input for department ID registration/authentication
Purpose of use, When used Set up so that the department ID and also the password are input in 7 digits for department ID
registration and authentication.
Precautions for use -
Settings and adjustment 0: Input as before
ranges 1: Input using 7 digits
Unit -
Value at time of shipment 0
from factory/Value
established when RAM is
cleared
Setting, adjustment and 1) Select the item to highlight it, input the setting, and press the OK key.
operation procedures 2) Set the main power switch to OFF and back to ON.
Related service modes -
Additional description and -
notes
T-17-69
Chapter 17
0019-9618
17-147