Copying Onto Special Material Via The Special Feeder - Canon oce 31x5e Daily Maintenance

For heavy materials, open the 'Extra' section and select 'Special'
Note:
settings. Then press the 'Output tray' function button and select the upper
tray.
Make other selections as required.
7
Press the start button
8

Copying onto special material via the special feeder

The special feeder, a slot located in the paper compartment door, is designed
to allow feeding in of special copy material such as paperbacked overhead
sheets, pre-printed material, labels and films. It also allows you to make copies
onto all other paper sizes (DIN A sizes, folio and USA paper sizes).
Non-DIN A-sized originals will not be recognized by the copier. For these
originals you must select the zoom factor manually.
long-edge feed originals
short-edge feed originals
[36] Feed direction of pre-printed and punched copy material in the special feeder
M
Copying onto special material via the special feeder
Place your originals in the automatic feeder or on the glass platen.
1
Indicate whether the originals are 1-sided or 2-sided and choose 1-sided or
2
2-sided copies using the 'Original' and 'Copy' function buttons.
If you want to copy onto both sides of the special copy material, you
Note:
will have to feed the material in twice, turning it after one side of the copy
has been made.
Open the 'Paper' section and select the 'Paper input' settings.
3
Select 'Special feeder' with the function button.
4
Indicate the paper size using the corresponding function button.
5
64 Océ 31x5E Copy jobs & daily maintenance
.
✱
Feed direction of copy material in special feeder
Feed direction of copy material in special feeder
✱ = Top of page
= Feed direction