Fixing Film Sensor; Before Removing The Fixing Film Sensor; Removing The Fixing Film Sensor - Canon iR3245 Series Service Manual

1) Disconnect the connector [2] of the harness [1].
2) Remove the front latch [2] of the internal delivery sensor [1] to remove
the internal delivery sensor.

9.5.6 Fixing Film Sensor

9.5.6.1 Before Removing the Fixing Film Sensor

iR3225 / iR3225N / iR3235 / iR3235N / iR3245 / iR3245N
1) Remove the rear right cover. (page 10-16)Reference[Removing the
Rear Right Cover]
2) Release the right cover. (page 10-36)Reference[Releasing the Right
Cover]
3) Remove the fixing unit. (page 9-8)Reference[Removing the Fixing
Unit]

9.5.6.2 Removing the Fixing Film Sensor

iR3225 / iR3225N / iR3235 / iR3235N / iR3245 / iR3245N
1) Remove the internal delivery cover unit [3].
- 1 screw [1]
- 1 stepped screw [2]
F-9-33
F-9-34
F-9-35
2) Remove the 2 screws [1] to detach the grounding plate [2].
3) Remove the screw [1] to detach the sensor cover [2].
[1]
0018-9936
4) Remove the screw [1].
0018-9937
5) Free the harness [1] from the guide [2].
Chapter 9
F-9-36
[2]
F-9-37
[1]
F-9-38
F-9-39
9-13