Copier > Option > User (3/7) - Canon iR3245 Series Service Manual

Chapter 17
Item Level
COPY-JOB 1
OP-SZ-DT 2
17.6.1.18 COPIER > OPTION > USER (3/7)
iR3225 / iR3225N / iR3235 / iR3235N / iR3245 / iR3245N
Item Level
NW-SCAN 2
17-144
COPIER > OPTION > USER
Description
Title Prohibition of copy job reservations when card reader/coin vender is used
Purpose of use, When used Prohibit copy job reservations when the card reader or coin vender is used.
Precautions for use -
Settings and adjustment 0: Reservation enabled
ranges 1: Reservation prohibited
Unit -
Value at time of shipment 0
from factory/Value
established when RAM is
cleared
Setting, adjustment and 1) Select the item to highlight it, input the setting, and press the OK key.
operation procedures 2) Set the main power switch to OFF and back to ON.
Related service modes -
Additional description and -
notes
Title Setting as to whether to detect document sizes while platen remains open
Purpose of use, When used This item is used document sizes are to be detected automatically in cases where thick books, 3-
dementional objects, etc. are scanned. This item is used when document size detection is to be
activated while the platen remains open.
Precautions for use When COPIER > OPTION > USER > SIZE-DET(Level 2) is set to '0', the document sizes are not
detected while the platen remains open even if this mode is set to '1'.
Settings and adjustment 0: Document sizes cannot be detected while the platen remains open.
ranges -> The document sizes must be input from the operation unit screen.
1: Document sizes can be detected while the platen remains open.
-> The document sizes are detected by pressing the start key.
Unit -
Value at time of shipment 0
from factory/Value
established when RAM is
cleared
Setting, adjustment and 1) Select the item to highlight it, input the setting, and press the OK key.
operation procedures 2) Set the main power switch to OFF and back to ON.
Related service modes COPIER > OPTION > USER > SIZE-DET (Level 2)
Additional description and -
notes
COPIER > OPTION > USER
Description
Title Enabling of network scan function
Purpose of use, When used Enable the network scan function.
Precautions for use The setting cannot be changed on machines for the Japanese market.
This item is fixed at '1' for PS/PCL machines destined for overseas.
Settings and adjustment 0: The network scan function is not enabled.
ranges 1: The network scan function is enabled.
Unit -
Value at time of shipment -
from factory/Value
established when RAM is
cleared
Setting, adjustment and 1) Select the item to highlight it, input the setting, and press the OK key.
operation procedures 2) Set the main power switch to OFF and back to ON.
Related service modes -
Additional description and -
notes
T-17-68
0019-9617