[Integral Abs] Removing/Installing Front Abs Sensor; [Integral Abs] Removing/Installing Front Abs Sensor Ring - BMW k 1200 rs Repair Manual

[Integral ABS] Removing/
3400
installing front ABS sensor
d
Warning:
Comply with safety precautions when handling or
working with fuel; note that the fuel lines are pressu-
rised.
e
Attention:
Disconnect ground lead from battery and insulate.
– Remove fuel tank (
a
– Open the lid of the electronic equipment box.
•
Open all cable ties holding ABS sensor cable (1).
•
Disconnect ABS sensor cable (1) from the tele-
scopic fork.
•
Disconnect the plug (arrow) for ABS sensor
cable (1) in electronic equipment box (2).
16.5).
1
KR340220
2
1
KR610130
•
Release the fasteners (arrows) for ABS
sensor (3).
•
Take off ABS sensor (3).
•
Installation is the reverse of the removal proce-
dure. Pay particular attention to the following:
e
Attention:
Carefully route the ABS cable and secure in position
with cable ties ( 34.10).
a
X
Tightening torque:
Fastener for ABS sensor ............................... 4 Nm
[Integral ABS] Removing/install-
3400
ing front ABS sensor ring
•
Remove front left brake disc (
3
KR340880
34.8).
a
34.9