1
Removing and installing front ABS
sensor
•
Remove fuel tank.
•
Separate plug connector (1) in sensor line.
•
Remove sensor (2) with Torx T 25.
•
Install by following the above work instructions in
the reverse order.
e
Caution:
Run the sensor line correctly.
Check sensor gap and adjust if necessary with
spacer plate (3).
Sensor gap:............ 0.45...0.55 mm (1.77...2.22 in)
X
Tightening torque:
Sensor ..........................................handtight, 4 Nm
3
2
C340050
34.11