Removing And Installing Front Abs Sensor - BMW R 1100 S Repair Manual

1
Removing and installing front ABS
sensor
•
Disengage and pull back the fuel tank.
•
Disconnect plug (1) of sensor cable.
•
Remove sensor (2) with Torx T 25.
•
Installation is the reverse of the removal proce-
dure.
e
Caution:
Route the sensor cable correctly.
Check sensor gap and adjust if necessary with
shim (3).
Sensor gap:........ 0.45...0.55 mm (0.018...0.022 in)
X
Tightening torque:
Sensor ..........................................handtight, 4 Nm
3
2
S340030
34.11