Removing/Installing Shaft Sealing Ring For Driver; Removing Countershaft And Layshaft With Freewheel - BMW k 1200 rs Repair Manual

Removing/installing shaft sealing ring for driver

•
If the intermediate flange has been removed, le-
ver out the sealing ring.
00 5 010
•
With the intermediate flange installed, remove
the sealing ring with an internal puller,
BMW No. 00 5 010, and the small pressure head
from the puller-separator, BMW No. 00 7 500.
L
Note:
Clean the sealing ring seat.
•
Pre-shape the sealing ring with your thumbs and
drive it in dry with a drift, BMW No. 11 1 620, and
handle, BMW No. 00 5 500.
11.30
Removing countershaft and lay-
1100
shaft with freewheel
1
KR110140
•
Pull the countershaft and layshaft out of the
crankcase together.
•
Note flat spring (1).
KR110690