Removing And Installing Front Abs Sensor - BMW R 1150 GS Repair Manual

1
Removing and installing front ABS
sensor
•
Remove front wheel.
•
Remove fuel tank.
•
Disconnect plug (1) of sensor cable.
•
Remove sensor (2) with Torx T 25.
•
Installation is the reverse of the removal proce-
dure.
e
Caution:
Route the sensor cable correctly.
Check sensor gap and adjust if necessary with
shim (3).
Sensor gap:...... 0.45...0.55 mm (0.018 ... 0.022 in)
X
Tightening torque:
Sensor ..........................................handtight, 4 Nm
2
3
R21340080
34.11