Installing right/left wheel bearing
36 31
e
Important:
When installing, always start with the left side.
Installing left wheel bearing
1
2
3
4
3
36 5 512
•
Chill the wheel bearing (3).
•
Heat bearing seat to 60 °C (140 °F).
•
Press in wheel bearing (3) with handle for drift,
BMW No. 00 5 500, and drift,
BMW No. 36 5 512, until it is in contact with the
bearing seat.
L
Note:
The curved side of circlip (2) faces the wheel
bearing (3).
•
Install circlip (2) with suitable pliers.
•
Grease shaft sealing ring (1) lightly with
Shell Retinax EP2 and drive it in flush with the
wheel hub, using handle for drift
BMW No. 00 5 500, and drift,
BMW No. 36 5 512.
Installing right wheel bearing
•
e
When pressing in the right wheel bearing, make sure
that the left wheel bearing does not move away from
its seat.
•
•
•
KR360021
00 5 500
h
60
KR360070
Insert spacing sleeve (4).
Important:
Cool the wheel bearing (3).
Heat bearing seat to 60 °C (140 °F).
Drive wheel bearing (3) in with handle for drift,
BMW No. 00 5 500, and drift,
BMW No. 36 5 512, as far as the inner ring of
spacing sleeve (4).
36.7