2
1
4
Removing/installing telescopic
31 42
fork
Removing telescopic fork
31 42
–
Remove the engine spoiler and holder
(
46.14).
a
•
Secure lifter, BMW No. 00 1 510, to oil sump.
e
Important:
Do not operate the handbrake lever when the brake
calipers have been removed. Protect painted parts
from scratching: apply adhesive masking tape if
necessary.
–
Remove front wheel (
a
–
Remove left and right fairing side sections
(
46.8).
a
–
Remove the rear section of the front mudguard
(
46.6).
a
•
Disconnect the ABS sensor and cable from the
telescopic fork.
4
36.5).
3
L
Note:
If the telescopic fork is to be disassembled, loosen
end screws (1) on fixed fork tube (4) at left/right.
Screws are secured with a thread-locking com-
pound.
•
Loosen the left/right handlebar holder clamp (3).
•
Loosen the left/right fork bridge clamp (2).
KR310190
31.5