Unpacking the motorcycle
00 00
•
Lever off the cover.
•
Cut the plastic sheet open and pull it off.
•
Take out the separate pack of items:
–
Windscreen
–
Mirrors, right/left
–
Engine spoiler
–
Small parts/fasteners
•
Force off cross-struts with a suitable lever.
e
Attention:
Do not knock the cross-struts out or the motorcycle
may be damaged.
•
Remove the end-walls.
•
Remove the side-walls.
e
Attention:
Remove any nails projecting from the base of the
packing or lying on the base or on the floor.
•
Open the tensioning straps.
e
Attention:
Make sure that the tensioning straps cannot fly out
and cause injury when they are opened.
•
Push the motorcycle off the pallet.
•
Dispose of the packing materials in an environ-
mentally responsible manner as described in Cir-
cular No. 23/91 - Sales.
General instructions
Pushing the motorcycle onto a work-
shop platform
d
Warning:
[Integral ABS] Take care on account of residual
braking function.
Wait until self-diagnosis completes and, with ignition
switched on, push the motorcycle onto the platform.
The brake booster is active.
Inspecting motorcycle for dam-
00 00
age
•
Check for damage.
•
"Express message" to
BMW Motorrad, UX-VS-1
Fax number
•
Rectify the fault.
•
If parts are needed, order them by using the
electronic parts list.
•
Costs are to be processed by the warranty claim
system (stage 4). Defect codes:
–
Parts missing
–
Parts damaged
–
Incorrect parts delivered
•
If the parts are not in the Electronic Parts Cata-
log, please contact Parts Service.
Checking that delivery is com-
00 00
plete
•
Turn key in seat lock to left and hold it there.
•
Pull the seat upwards and to the rear out of its
catch, as far as the first detent position.
•
Remove seat.
•
Check that the delivery is complete:
–
Separate pack of items
–
Keys
–
All optional extras
–
Toolkit (see the illustration of the contents on the
inside of the toolkit bag)
–
Documentation (open the cover on the underside
of the seat)
089-382-33220
10 01 00 00 00
10 02 00 00 00
10 03 00 00 00
00.21