1
Removing and installing Integral
ABS sensor
Removing and installing front
34 52 044
Integral ABS sensor
•
Remove the cable ties securing the sensor ca-
ble.
•
Disconnect plug (1) of sensor cable.
•
Guide the sensor cable down until clear.
•
Remove sensor (2).
•
Installation is the reverse of the removal proce-
dure.
e
Attention:
Route the sensor cable correctly.
Ensure that clips (3) are correctly seated.
X
Tightening torque:
Sensor ........................................ hand-tight, 4 Nm
34.10
3
3
2
R22340060