Checking throttle cable play,
13 00
adjusting if necessary
(Inspections I and III)
•
With the handlebars turned to various angles,
open the throttle twistgrip fully and allow it to clo-
se again.
–
When released, the twistgrip must return to the
closed position by itself.
•
Preset throttle cable play with the engine cold to
1.5 mm (0.0591 in).
d
Warning:
Observe the hazard avoidance instructions for run-
ning internal combustion engines in enclosed spa-
ces.
•
Warm the engine up to its normal operating tem-
perature (radiator fan starts to run).
•
Adjust throttle cable play to 0.5 mm (0.0197 in).
Setting:
Default setting of throttle cable play
(cold engine).............................. 1.5 mm (0.0591 in)
Throttle cable play (warm engine)0.5 mm (0.0197 in)
00.36
KR130230