Air Filter Check (Tc-Txc) - Husqvarna 2009 TE 310 Workshop Manual

Hide thumbs Also See for 2009 TE 310:
Table of Contents

Advertisement

1
A
3
5
SETTINGS AND ADJUSTMENTS

Air filter check (TC-TXC)

Turn rear pin (1) counterclockwise, remove it and release the saddle from the
front fastening screw.
TXC: Take out the battery (A) and place it sideways on the vehicle.
To gain access to the air filter, lift a little the electronic power unit (2). Remove
screw (3) and the filter (4). Separate filter (5) from frame (6).
AIR FILTER AND CLEANING
Wash filter with a specific detergent (AGIP" Filter clean foam air detergent fluid"
or similar) then dry it fully (wash filter with gasoline only in case of necessity).
Plunge filter in special oil for filters (AGIP "Foam air filter protection oil" or simi-
lar), then wring it to drain superfluous oil.
: Do not use gasoline or a low flash-point solvent to clean the element. A
TXC
fire or explosion could result.
: Clean the element in a well ventilated area, and do not allow sparks or
4
flames anywhere near the working area.
6
D.18
Part. N. 8000 H0368 (09-2008)

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents