Honeywell GX-Series Installation And Setup Manual page 72

GX-Series Control Panel Installation and Setup Guide
Code has been enabled (refer to option 63.1 = OPTIONS.Groups); the system defaults to groups
disabled.
On selecting the Modify Groups option, the groups currently allocated to the user are displayed. All
users default to group 1. Pressing the group number toggles the group assigned to the user; pressing 2
and 3 assign groups 2 and 3 to the user; pressing 1 (when group 1 is already assigned) removes group 1
from the user code. To assign group choice to the user, press the * key. When the required groups have
been assigned to the user, press the ent key to accept the programming and return to the previous menu
level.
Group Options
Single Group
Multiple Groups Users can be allocated to more than one group in which case access and operation is
Group Choice
NOTES: 1. The Manager, Engineer and Remote codes have fixed access to all system groups; this cannot
be reprogrammed.
2. The Manager, Engineer and Remote codes are assigned group choice by default. The
Manager can have the group choice feature removed; the Engineer and Remote codes have
fixed group choice.
3. Users authorized to access Option 42 = CODES, can only assign the groups that have been
assigned to their user code; A user who does not have access to group 4, cannot assign group
4 to another user code.
7 = Card Number
The Card Number contains one of the following:
•
the serial number from an access control card
•
the 10 digit number etched onto the proximity card
•
the decrypted code of cards self learned into the system for use with the access control reader.
These numbers identify the proximity card to the system and references it to the user to which it has
been assigned.
By default card number is empty. To enter the required number:
1. Enter the unique 10 digit number laser etched onto the proximity card.
2. Press the ent key to save the programming and return to the previous menu level.
NOTES: A card number can be assigned to a user code that does not have a PIN allocated to it. All other
options assigned to this user are valid for the card button programmed.
For access control cards, when the serial number is not printed on the card, the card number can
be learned using the add batch menu (42.3.1).
8 = MAX Function (Access Control Function)
The card button can be assigned a single menu option. The user must be authorized to access the menu
option assigned to the MAX (proximity card) - either by the user level assigned or menu option 68 =
Group Block
A1-8
B1-8
C1-8
D1-8
Table 6-7. Groups
A user can be assigned to any single group. In this case the type 2.2 and above user
can only access, set (arm) and unset (disarm) the single group.
collective; the user cannot choose to operate on a single or combination of the
assigned groups.
Users can be allocated more than one group but also have the choice of which of the
allocated groups to view, set (arm) or unset (disarm). Pressing the * key while
assigning groups to the user assigns the group choice feature.
Physical Groups
1-8
9-16
17-24
25-32
6-26