Installing The New Front Vga Connector; Re-Installing The Front Panel Module; Concluding Steps; Front Usb3.0 Connector - Fujitsu PRIMERGY RX2540 M1 Upgrade And Maintenance Manual

Front panel and external front connectors

13.3.3.4 Installing the new front VGA connector

Ê Install the new front VGA connector as described in section
front VGA" on page

13.3.3.5 Re-installing the front panel module

"Removing the front panel card" on page
Ê

13.3.3.6 Concluding steps

"Installing the fan box" on page 156
Ê
"Reassembling" on page 61
Ê
"Connecting the server to the power source" on page 66
Ê
"Switching on the server" on page 67
Ê
"Enabling BitLocker functionality" on page 92
Ê
13.4

Front USB3.0 connector

13.4.1 Installing the front USB3.0 connector

Field Replaceable Unit
(FRU)
Tools: hexagon SW5

13.4.1.1 Preliminary steps

"Disabling or suspending BitLocker functionality" on page 69
Ê
"Locating the defective server" on page 51
Ê
"Shutting down the server" on page 53
Ê
"Disconnecting power cords" on page 54
Ê
"Getting access to the component" on page 55
Ê
350
346.
Upgrade and Maintenance Manual
342.
Hardware: 10 minutes
"Installing the
RX2540 M1