Removing The Front Usb3.0 Connector; Re-Installing The Front Panel Module; Concluding Steps - Fujitsu PRIMERGY RX2540 M1 Upgrade And Maintenance Manual

Front panel and external front connectors

13.4.2.3 Removing the front USB3.0 connector

Figure 239: Fastening the front USB3.0 connector
Ê Fasten the front USB3.0 connector with two screws.
V
CAUTION!
Do not fasten the screw too firmly (screw torque 0.4 Nm)!

13.4.2.4 Re-installing the front panel module

"Removing the front panel card" on page 342
Ê

13.4.2.5 Concluding steps

"Installing the fan box" on page 156
Ê
"Reassembling" on page 61
Ê
"Connecting the server to the power source" on page 66
Ê
"Switching on the server" on page 67
Ê
"Enabling BitLocker functionality" on page 92
Ê
354 Upgrade and Maintenance Manual
RX2540 M1