Replacing The Front Usb3.0 Connector; Preliminary Steps; Removing The Front Panel Module; Removing The Front Usb3.0 Connector - Fujitsu PRIMERGY RX2540 M1 Upgrade And Maintenance Manual

13.4.3 Replacing the front USB3.0 connector

Field Replaceable Unit
(FRU)
Tools: hexagonal SW5

13.4.3.1 Preliminary steps

"Disabling or suspending BitLocker functionality" on page 69
Ê
"Locating the defective server" on page 51
Ê
"Shutting down the server" on page 53
Ê
"Disconnecting power cords" on page 54
Ê
"Getting access to the component" on page 55
Ê
"Removing the fan box" on page 154
Ê

13.4.3.2 Removing the front panel module

"Removing the front panel module" on page 344
Ê

13.4.3.3 Removing the front USB3.0 connector

"Removing the front USB3.0 connector" on page
Ê

13.4.3.4 Installing the new front USB3.0 connector

Ê Install the new front VGA connector as described in section
front USB3.0 connector" on page

13.4.3.5 Re-installing the front panel module

"Removing the front panel card" on page
Ê

13.4.3.6 Concluding steps

"Installing the fan box" on page 156
Ê
RX2540 M1
Front panel and external front connectors
350.
Upgrade and Maintenance Manual
Hardware: 15 minutes
354.
342.
"Installing the
355