Installing The 4X 3.5-Inch Hdd Sas Backplane 2 - Fujitsu PRIMERGY RX2540 M1 Upgrade And Maintenance Manual

Figure 39: Removing the 4x 3.5-inch HDD SAS backplane 2
Ê Remove the 4x 3.5-inch HDD SAS backplane 2.
I
Take care that the OOB connector will not be damaged!
7.3.1.5

Installing the 4x 3.5-inch HDD SAS backplane 2

Figure 40: Installing the 3.5-inch HDD SAS backplane 2
Ê At a slight angle insert the 3.5-inch HDD SAS backplane 2 between the
punching and the centering pin. See section
SAS backplane 1" on page
RX2540 M1
128.
Upgrade and Maintenance Manual
Hard disk drives / solid state drives
"Installing the 4x 3.5-inch HDD
131