Table of Contents
Advertisement
Before you start
I
For the latest information on hardware options, refer to your server's
hardware configurator available online at the following address:
for the EMEA market:
http://ts.fujitsu.com/products/standard_servers/index.htm
for the Japanese market:
http://jp.fujitsu.com/platform/server/primergy/system/
Please contact your local Fujitsu customer service partner for details on how to
order expansion kits or spare parts. Use the Fujitsu Illustrated Spares Catalog
to identify the required spare part and obtain technical data and order
information. Illustrated Spares catalogs are available online at
http://manuals.ts.fujitsu.com/illustrated_spares
Replacing a defective component
The Global Error indicator on the front of the server reports defective hardware
components that need to be replaced. For further information on the controls
and indicators of your server, refer to the operating manual of your server and
section
"Connectors and indicators" on page
If the system has been powered off in order to replace a non-hot plug unit, a
system of PRIMERGY diagnostic indicators guides you to the defective
component. The "Indicate CSS" button enables the indicator next to the
defective component even if the server has been switched off and disconnected
from the mains. For further information, please refer to sections
diagnostics information" on page 51
front panel" on page
If the defective component is a customer replaceable unit included in the CSS
concept (Customer Self Service, only available for EMEA market), the CSS
indicators on the front and rear side of the server will light up.
It is recommended to prepare local maintenance tasks using remote diagnostics
procedures, as described in the "ServerView Suite Local Service Concept
(LSC)" manual.
28
and
431.
Upgrade and Maintenance Manual
(EMEA market only).
423.
"Connectors and indicators on the
"Using
RX2540 M1
Advertisement
Table of Contents
