Hard disk drives / solid state drives
Ê Fold back the 4x 3.5-inch HDD SAS backplane 2.
I
Take care that the OOB connector will not be damaged!
Figure 41: Installing the 3.5-inch HDD SAS backplane 2
Ê Reconnect all cables to the 3.5-inch HDD SAS backplane 2:
– Power cable (1)
– SAS cable (2)
– If applicable, OOB cable (3)
Ê Fasten the 4x 3.5-inch HDD SAS backplane 3 with the screw.
I
For a complete cabling overview, please refer to section
cables" on page
7.3.1.6
Concluding steps
"Installing the fan box" on page 156
Ê
"Reassembling" on page 61
Ê
"Installing 3.5-inch HDD modules" on page 115
Ê
"Connecting the server to the power source" on page 66
Ê
132
411.
Upgrade and Maintenance Manual
"List of used
RX2540 M1