Hard disk drives / solid state drives
7.3.5
Replacing the connector card
Field Replaceable Unit
(FRU)
Tools: Phillips PH2 / (+) No. 2 screw driver
7.3.5.1
Preliminary steps
"Locating the defective server" on page 51
Ê
"Disabling or suspending BitLocker functionality" on page 69
Ê
"Shutting down the server" on page 53
Ê
"Disconnecting power cords" on page 54
Ê
"Getting access to the component" on page 55
Ê
"Removing the fan box" on page 154
Ê
7.3.5.2
Removing the SAS expander board
Ê Remove the assembled expander holder as described in section
the SAS expander board" on page
7.3.5.3
Removing the defective connector card
Figure 62: Removing the connector card
148
137.
Upgrade and Maintenance Manual
Hardware: 10 minutes
"Removing
RX2540 M1