Concluding Steps - Fujitsu PRIMERGY RX2540 M1 Upgrade And Maintenance Manual

Expansion cards and backup units
Figure 89: Installing the expansion card
Ê Carefully insert the expansion card into the desired PCI slot and press down
firmly until it is fully seated in the slot.
Ê Fasten the expansion card with the screw (see circle).
Ê If applicable, install SFP+ transceiver modules into the new expansion card,
as described in section
Ê If applicable, connect internal cables to the expansion card.
I
For a complete cabling overview, please refer to section
cables" on page
Ê If applicable, connect a FBU to the expansion card as described in section
"Installing a FBU" on page
9.4.1.4

Concluding steps

"Reassembling" on page 61
Ê
Ê If applicable, reconnect all external cables to the expansion card.
"Connecting the server to the power source" on page 66
Ê
"Switching on the server" on page 67
Ê
180
"Installing SFP+ transceiver modules" on page
411.
237.
Upgrade and Maintenance Manual
172.
"List of used
RX2540 M1