Replacing The Sd Card; Preliminary Steps; Concluding Steps; Replacing The System Board - Fujitsu PRIMERGY RX2540 M1 Upgrade And Maintenance Manual

14.6.3 Replacing the SD card

Upgrade and Repair Unit
(URU)
Tools: tool-less

14.6.3.1 Preliminary steps

"Locating the defective server" on page 51
Ê
"Shutting down the server" on page 53
Ê
"Disconnecting power cords" on page 54
Ê
"Getting access to the component" on page 55
Ê
14.6.3.2 Replacing the SD card
Ê Remove the defective SD card as described in section
card" on page
Ê Install the new SD card as described in section
page 393.

14.6.3.3 Concluding steps

"Reassembling" on page 61
Ê
"Connecting the server to the power source" on page 66
Ê
"Switching on the server" on page 67
Ê
"Verifying system information backup / restore" on page 79
Ê
14.7

Replacing the system board

Field Replaceable Unit
(FRU)
RX2540 M1
396.
Upgrade and Maintenance Manual
System board and components
Hardware: 5 minutes
"Removing the SD
"Installing the SD card" on
Hardware: 50 minutes
Software: 10 minutes
397