Installing The New 12X 3.5-Inch Hdd Backplane - Fujitsu PRIMERGY RX2540 M1 Upgrade And Maintenance Manual

Hard disk drives / solid state drives
Figure 48: Removing the 12x 3.5-inch HDD backplane
Ê Remove the four screws (see circles).
Ê Take out the HDD backplane at a slight angle (45°).
7.3.3.4

Installing the new 12x 3.5-inch HDD backplane

Figure 49: Installing the 12x 3.5-inch HDD backplane (A)
Ê Position the HDD backplane behind the four stampings into the chassis (see
circles).
Upgrade and Maintenance Manual 139
RX2540 M1