Replacing The 12X 3.5-Inch Hdd Backplane; Preliminary Steps - Fujitsu PRIMERGY RX2540 M1 Upgrade And Maintenance Manual

Hard disk drives / solid state drives
7.3.3

Replacing the 12x 3.5-inch HDD backplane

Field Replaceable Unit
(FRU)
Tools: Phillips PH2 / (+) No. 2 screw driver
7.3.3.1

Preliminary steps

"Locating the defective server" on page 51
Ê
"Disabling or suspending BitLocker functionality" on page 69
Ê
"Shutting down the server" on page 53
Ê
"Disconnecting power cords" on page 54
Ê
Ê Remove all HDD / SSD modules from the server as described in section
"Removing 3.5-inch HDD modules" on page
V
CAUTION!
Ensure that all hard disk drives are uniquely identified so that you can
reinsert them into their original bays after replacing the HDD
backplane.
"Getting access to the component" on page 55
Ê
"Removing the fan box" on page 154
Ê
136 Upgrade and Maintenance Manual
Hardware: 15 minutes
118.
RX2540 M1