Concluding Steps - Fujitsu PRIMERGY RX2540 M1 Upgrade And Maintenance Manual

Figure 175: Installing memory modules (A)
Ê Press out the securing clip at each end of the memory slot.
Figure 176: Installing memory modules (B)
Ê Align the notch on the bottom of the module with the crossbar in the slot.
Ê Press down on the memory module until the securing clips snap into the
cut-outs at each end of the module.

10.2.3 Concluding steps

"Reassembling" on page 61
Ê
"Connecting the server to the power source" on page 66
Ê
"Switching on the server" on page 67
Ê
"Updating or recovering the system board BIOS and iRMC" on page 77
Ê
"Enabling SVOM boot watchdog functionality" on page 86
Ê
"Verifying the memory mode" on page 87
Ê
"Enabling BitLocker functionality" on page 92
Ê
RX2540 M1
Upgrade and Maintenance Manual
Main memory
281